Categories:
Resins
HS-1220 High-Temperature Resin System for Manufacturing Composites
Our HS-1220 is a Polysilazane Precursor Matrix dry powder high-performance and high-temperature resin system designed and formulated for manufacturing composites. (also listed in High Temperature)
HS-1230 High-Temperature Pre-Preg Resin
Our HS-1230 is a High Temperature single component clear liquid pre-preg resin. It is a carbosilazane matrix polymer precursor ceramic resin system. Elevated inert atmosphere cures offer up to 2190F .
HS-752 Polysilazane Matrix High Performance Composite Resin System
This proprietary formulation exhibits excellent adhesion to carbon, glass, and a host of other fibers, TG-DMA of 245°C / 473°F, Tensile Modulus of 215,000 psi, Tensile Strength of 5,868 psi, Tensile elongation of 14%. Excellent properties for Pre-Preg, VARTM, Wet-lay-up, etc. Excellent pot life, Variable cure schedules to achieve desired production schedules and results.
HS-989 High Solids Nano-Ceramic Clear Coat
This is a nano-ceramic resinous coating matrix, that when applied correctly offers
excellent heat and water resistance to fibrous substrates. (also listed in Hydrophobic)
Thermal Management
HS-1450 High-Temperature Thermal Insulating Coating
The HS-1450 is a Polysilazane-Nano-Ceramic based Thermal Insulating Coating that is formulated to resist temperatures of 2400F as well as direct flame exposure. Additionally, it creates a water resistant barrier to help better protect the substrate structure.
HS-745 Fire-Resistant Surface Coating
This coating is very resistant to direct flame of 2000°F +, has a low to no flame spread, is self-extinguishing and virtually waterproof. The material has excellent adhesion properties to most materials such as metals, composite surfaces, wood and most plastics.
HS-1465 Thermal Insulating Flex Coat
Our HS-1465 Flex Coat is a high performance-single component-ambient air cured hydrophobic product. It is for exterior or interior fire resistant sound, thermal and vibration dampening.
HS-900 Series Nano-Ceramic Clear (900-901-902)
These coatings are thermal-dissipating and moisture protection clear silazane coatings which were originally designed as a circuit board coating but is used for many other applications. (also listed in Heat Dissipation)
Hydrophobic
The HS-922, Designed and formulated for use on a fabric, flexible, or leather substrate, is a single component solution that ambient cures creating and intrinsic bond to the substrate material penetrating deep into the fibers offering a self-lubricating dry fill on each fiber or stitching, greatly reducing fiber wear and excellent water repellent and hydrophobic properties.
HS-910 Nano-Ceramic Clear Coat
HS-910 is a Nano-ceramic clear coat that offers an unparalleled super-slick, non-stick surface that repels exhaust grime and ice. It is ideal for aircraft and marine surfaces. This product is also available in a higher solids nano-ceramic clear slick-coat especially designed for wind blades and aircraft surfaces where high performance and less drag is desired. (also listed in Clear Coats)
HS-910-C “Higher Solids” Nano-Ceramic Clear Slick-Coat
HS-910-C is an nano-ceramic polysilazane, which is extremely hydrophobic and creates a super-slick substrate. It is ideal for top coating wind blades, aircraft surfaces, etc.
HS-910L Nano-Ceramic Clear Coat for Alloys, Plastics, and Acrylics
This is a clear coat ideal for top coating all alloys, plastics, acrylics, etc. (also listed in Clear Coats)
HS-924 Quick-Slick Clear Nano-Ceramic
The HS-924 Quick-Slick is a high performance, single component, ambient air cure thin-film product. Not only does it create a covalent bond to the substrate making an intrinsic part of the material, but it is an extreme hydrophobic coating with super slick properties giving the ability to greatly reducing drag. (also listed in Clear Coats)
HS-1465 Thermal Insulating Flex Coat
Our HS-1465 Flex Coat is a high performance-single component-ambient air cured hydrophobic product. It is for exterior or interior fire resistant sound, thermal and vibration dampening.
HS-908 Glass Sealer & Finish Nano-Ceramic Clear Coating
HS-908 creates a covalent bond to the substrate creating a super slick surface that resists and prevents the bonding of most types of attachments including dirt, debris, snow and ice, etc.
HS-989 High Solids Nano-Ceramic Clear Coat
This is a nano-ceramic resinous coating matrix, that when applied correctly offers
excellent heat and water resistance to fibrous substrates. (also listed in Resins)
Sealers
HS-908 Glass Sealer & Finish Nano-Ceramic Clear Coating
HS-908 creates a covalent bond to the substrate creating a super slick surface that resists and prevents the bonding of most types of attachments including dirt, debris, snow and ice, etc.
HS-938 Clear Protective Sealer Coat
This sealer is able to fill and seal the micro-pores and cracks of any substrate with an extremely tough high temperature resistant material that becomes a slick-thin dry film lubricating coating that works in conjunction with or without the use of oils making it ideal for combustion, turbine, and jet type engine components.
This sealer is a polysilazane formulated coating that contains no free silicones, is VOC exempt, and is air ambient cured.
High Temperature
HS-980HT High Temperature Coating
Our HS-980 is a polysilazane formulated coating product that is an extreme high temperature protective coating that can sustain operating conditions of 1800 degrees F.
Our HS-950 is also a primer coating. It is a high-performance adhesion promoter that is designed to create an intrinsic bond to most difficult surfaces, materials and products including for high temperature applications, allowing other top coats to be applied even to polyethalene sheeting and similar, silicone surfaces, allows for intra-coat adhesion on or between silazane and similar chemistries.
HS-1220 High-Temperature Resin System for Manufacturing Composites
Our HS-1220 is a Polysilazane Precursor Matrix dry powder high-performance and high-temperature resin system designed and formulated for manufacturing composites. (also listed in Resins).
HS-930 Mold Release for Gel-Coat
This VOC-exempt solvent-based release is especially formulated for Gel-coat layups with the use of multiple coats of waxes, allowing for easy part pulls and reduced chance of mold tool damage and labor savings. (also listed in Clear Coats)
HS-974 Polysilazane Nano-Ceramic in Colors
HS-974 is a polysilazane thin film coating product that offers abrasion resistance, corrosion protection, and survives in elevated high temperatures and direct flame. This product is available in basic colors and metallic tones.
HS-900 Series Nano-Ceramic Clear (900-901-902)
These coatings are thermal-dissipating and moisture protection clear silazane coatings which were originally designed as a circuit board coating but is used for many other applications. (also listed in Heat Dissipation and Thermal Management)
Heat Dissipation
HS-900 Series Nano-Ceramic Clear (900-901-902)
These coatings are thermal-dissipating and moisture protection clear silazane coatings which were originally designed as a circuit board coating but is used for many other applications.
HS-906 Nano-Ceramic Clear Coat (8-12 micron DFT)
This is for use on all aircraft horizontal and vertical surfaces, this is the perfect coating to protect and maintain aircraft windscreens on the ground or during operations. (also listed in Clear Coats)
Primers
Our HS-950 is also a primer coating. It is a high-performance adhesion promoter that is designed to create an intrinsic bond to most difficult surfaces, materials and products including for high temperature applications, allowing other top coats to be applied even to polyethalene sheeting and similar, silicone surfaces, allows for intra-coat adhesion on or between silazane and similar chemistries.
HS-955 Hybrid Nano-Ceramic Clear Primer
HS-955 This coating is also a primer that promotes adhesion. It is used for ambient temperature applications and is used where a clear or transparent look is needed.
Our HS-965 is a chromate-free primer polysilazane-formulated coating. It is a single-component coating product that is corrosion, oxidation, abrasion, and chemical resistant that has a covalent bond to all metals, composites, semi-rigid, and flexible plastic alloys and many other substrates.
Clear Coats
HS-909 Clear Coating for Glass
This is a long lasting thin film finish for almost any smooth surface like glass, mirrors, polished metals, acrylics, plastics, rubber, and painted surfaces.
HS-910 Nano-Ceramic Clear Coat
HS-910 is a Nano-ceramic clear coat that offers an unparalleled super-slick, non-stick surface that repels exhaust grime and ice. It is ideal for aircraft and marine surfaces. This product is also available in a higher solids nano-ceramic clear slick-coat especially designed for wind blades and aircraft surfaces where high performance and less drag is desired. (also listed in Hydrophobic)
HS-910L Nano-Ceramic Clear Coat for Alloys, Plastics, and Acrylics
This is a clear coat ideal for top coating all alloys, plastics, acrylics, etc. (also listed in Hydrophobic)
HS-906 Nano-Ceramic Clear Coat (8-12 micron DFT)
This is for use on all aircraft horizontal and vertical surfaces, this is the perfect coating to protect and maintain aircraft windscreens on the ground or during operations. (also listed in Heat Dissipaton)
HS-907 Nano-Ceramic Clear Coat (12-20 micron DFT)
This helps reduce frictional drag, increase lift, increase speed and performance, and decrease fuel consumption.
HS-924 Quick-Slick Clear Nano-Ceramic
The HS-924 Quick-Slick is a high performance, single component, ambient air cure thin-film product. Not only does it create a covalent bond to the substrate making an intrinsic part of the material, but it is an extreme hydrophobic coating with super slick properties giving the ability to greatly reducing drag. (also listed in Hydrophobic)
HS-908 Glass Sealer & Finish Nano-Ceramic Clear Coating
HS-908 creates a covalent bond to the substrate creating a super slick surface that resists and prevents the bonding of most types of attachments including dirt, debris, snow and ice, etc.
HS-930 Mold Release for Gel-Coat
This VOC-exempt solvent-based release is especially formulated for Gel-coat layups with the use of multiple coats of waxes, allowing for easy part pulls and reduced chance of mold tool damage and labor savings. (also listed in High Temperature)